Brush Plungers
The Brush plunger is designed to operate in wells with
sand and solids suspended in the liquids.
The brush does not deteriorate from the mandrel during
flow due to the dual restraint system applied to the
brush fiber.
The brush also “flexes,” preventing solids
from accumulating in the body and allowing the plunger
to work well in tubing with irregular or tight spots.
The brush plunger is available in 1.910", 1.935” or 1.950”
OD, creating a better seal within the tubing for the
optimal removal of liquids. In addition, special bristles
on the brush are also available for problem situations.
| Plunger Diameters |
Weight |
| 1.50" for 2.00" OD |
4 lbs (1.8 kg) |
| 1.75" for 2.625" OD |
5 lbs (2.3 kg) |
| 2.00" for 2.375" OD |
6 lbs (2.7 kg) |
| 2.50" for 2.875" OD |
9 lbs (4.0 kg) |
| 3.00" for 3.50" OD |
11 lbs (5.0 kg) |
Also avaialable in High Temp materials for extreme conditions
where normal brush plungers may fail.
Shorter and lighter versions of
this plunger are available to meet your specific plunger
lift system requirements.
Contact Multi or a Multi Rep for
Details.
|
