Flow Chokes
Flow control prevents:
- Loss of revenue from unmeasured and
unrecorded gas sales.
- A short-term spike on a not fully
integrated orifice chart.
- Damaged equipment from the increased
velocity of the plunger.
180-Z In Line Choke
The 180-Z In Line Choke features a unique easy to use design that facilitates changing out the choke trim and replacing any items that are needed.
The "Z" is light, compact, and versatile in its use on plunger lift wells.
The main body of the choke is plumbed into the flow line and can become a motor valve when the well shows signs of artificial lift needs.
The 180-Z comes with 3/4" trim and a 1/64" indicator. There are other trims available including an equal percentage trim. The choke can also be flanged and is available with an H2S design following the industry standards. Pressure rating can be up to 3000 PSI.
The 180-Z In Line Choke can be made in an "L" body if required to fit your plunger lift system requirements.
Shipping weight: 18 lbs.
|
