JetStar

Multi Products Company offers JetStar™ casing plunger systems for 4-1/2″ and 5-1/2″ applications.  These systems include the casing lubricator, plunger and downhole components and our PetroCasing™ wellhead controller.

 

JetStar™ 4 1/2″ System

The use of the 4.5” JetStar casing plunger will produce significantly higher liquid volumes per 100 PSI of formation pressure because its larger surface area utilizes the pressure more efficiently

The controller will direct the cycles by using time or pressure.

The plunger, upon arrival at the surface, will activate the controller to either close the motor valve, keep the motor valve open for a period of time, or close the motor valve on a low casing pressure setting.

After the motor valve closes, the controller opens the auto-catcher and releases the plunger to start another cycle.

The controller also records the number of cycles and the total open times.

JetStar 4.5″ Ultra System Components

This system includes the 4.5″ JetStar Lubricator, 4.5″ JetStar XL Plunger Casing Stand, and the JetStar II Electronic Casing Plunger Controller package, and Auto-Diaphragm Latch.

 

JetStar™ 5 1/2″ System

Casing plungers produce significantly higher liquid volumes from available formation pressure due to larger surface area of the plunger. The Jetstar system for 5 1/2 inch casing is a proven, reliable system for removing liquids in low rate, depleted wells that do not have tubing. The 5 1/2 in. JetStar plunger is a hollow steel variety, with grooves for buoyancy and spirals to add spin for solids cleaning. The plunger is about 25 in. long, and weighs about 50 lbs.

Our proprietary PetroCasing controller is used to control plunger cycles either by using time or pressure. The plunger, upon arrival at the surface, activates the controller to either close the motor valve, keep the motor valve open for a period of time, or close the motor valve on a low casing pressure setting. After the motor valve closes, the controller opens the auto-catcher and releases the plunger to start another cycle.

The PetroCasing controller also records the number of cycles and the total open times.

Major JetStar 5 1/2 in. system components are listed below:

5 1/2 in. JetStar lubricator
5 1/2 in. JetStar XL plunger casing stand
5 1/2 in. Hollow steel plunger
PetroCasing controller package
Auto-Diaphragm latch

 

We also offer a full line of JetStar™ equipment including:

 

JetStar lubeJetStar™ Lubricators– Built with durable 4140 tool steel, the JetStar lubricator is engineered with reliability and safety in mind. Features include pressure tested 2” NPT threadolets, magnetic sensor and a convenient swing system for removal of the plunger. The heavy-duty spring in the top cap cushions the plunger impact upon arrival.

 

 

 

controllerPetroCasing™ Controllers – The JetStar™ System uses the PetroCasing™ Controller, which is designed specifically for safe, continuous operation of a casing plunger system.

It incorporates a dedicated program that regulates the cycle with maximum flow or sales time and logs events & times. Sensor input determines cycle and opens sales valve.

The PetroCasing™ Controller prevents errors with “Fail-Safe” technology by not allowing accidental opening of the valve while the plunger is traveling.

 

auto_dia_latch

 

 

Auto-Diaphragm Latches – The auto-diaphragm latch is designed to effectively catch the plunger upon arrival at the surface allowing free flow of liquids and gas. This is an integral tool in the automation of the system.

 

casingstand

 

 

Casing Stands – The JetStar casing stand is designed to latch into place above the perforations to provide a contact for closing the valve of the plunger.

 

 

equip_motor_vlv_Motor_Valve

 

 

JetStar™ Motor Valves – The JetStar™ system includes the Multi motor valve with an over-sized flow port (1.25″). Maximizing flow improves your gas income. Standard NPT connections and 2000 PSI working pressure are also featured.