Home
Home About Us Service Contact Us Order
Pressure Controllers
Time Controllers
Flow Measurement
Accessories
Plungers
Casing Plungers
Lubricators
Motor Valves
Flow Chokes
Sub-Surface Springs
Equipment Accessories
Vapor Recovery Unit
PumpMax Controller
PumpMax Motor
Field Services
Training
Troubleshooting
Build a Plunger
 


XL Lubricators—3500 psi W.P.

Multi offers a variety of custom manufactured lubricators that will meet exact customer requirements for plunger lift well installation.

There are several functions the lubricator serves in its installation on the well. The list below shows the major functions.

  1. The lubricator top serves as a spring-loaded receiver for the plunger. The upward travel of the plunger is stopped in less than one foot of distance. This makes the impact area at the top of the lubricator with its shock absorbing spring vital to preserving equipment integrity.
  2. The Flow Cross includes a welded connection for the flow line to the tubing with a threaded outlet for this connection.
  3. The Beagle sensor is for sensing the plunger arrival at the surface and communicating that arrival to the controller. This is a patented device that is vital to the intelligent Multi controller’s being able to perform properly.
  4. The Flow Cross also contains a threaded port for a needle valve to attach a gauge or pressure sensing line for the communication of the tubing pressure to the Multi controllers.
  5. The optional plunger Trap is also attached to the Flow Cross to trap and hold the plunger at the surface upon its arrival. This allows for the inspection and replacement of the plunger.
  6. The Trap is a manually activated device that is turned into position by a threaded rod and handle. The release of the plunger is accomplished by the reversing of the handle.
  7. The Auto-Trap is a Multi exclusive that permits the trap to be opened and closed by the controller. This allows for catching the plunger and holding it for a given time and then released. This can be utilized by any Multi lubricator but is mainly used by the JetStar casing plunger.

 

  


XL Lubricators

Working Pressure Rating 3500 PSI

Tubing I.D. Size Weight Per Unit* Standard Thread Size**
1-1/2" 50 lbs 2" 8rd EUE
1-3/4" 58 lbs 2" 8rd EUE
2" 56 lbs 2" 8rd EUE
2-1/2" 59 lbs 2-7/8" 8rd EUE
3-1/2" 80 lbs 3-1/2" 8rd EUE

*Lubricator an be shipped via UPS
** Custom thread sizes available may affect pressure rating

Lubricator Options

Beagle III Sensor
For Regular or XL Lubricators, indicates plunger arrival.

NPT Needle Valve
Sizes: 1/4" or 1/2"

Plunger Trap
Holds plunger at surface for removal

Threaded Trap
Thread sizes: 8 RD, API 10 RD*, 11-1/2 V NPT*
*May affect pressure rating

2" NPT Flow Outlet
To Connect to flow line