Set Chokes

This is the standard choke used for thousands of plunger lift wells as a means of flow control.

Set Chokes come with a standard 3/4” orifice and can be set in 1/64” increments. This allows for a full range of flow and the flow can be adjusted via a wheel handle on the end of the choke.

Set Chokes can also be ordered with a 1-inch maximum opening that allows for greater flow rates in wells with high liquid volumes and larger orifice or meter runs.

The Set Choke is also equipped with a set screw to lock the setting in place and avoid any movement caused by vibration. The choke can be flanged and has a working pressure of 2000 PSI.

Shipping weight: 24 lbs.