TeleMax Telemetry

The TeleMax Software package is a Microsoft Windows program that’s as easy to use as point and click. The user-friendly system is extremely easy to learn to facilitate operations.

The parameters screen will allow you to set any or all parameters and then send the changes to the controller. The ability to upload to the controller with a new operating program is another feature that allows you to use this with the Multi controllers to operate wells with the following lift concepts.

Continuous Flow.
Using the FlowMax to monitor flow line pressure or flow line problems and close a valve.
Intermittent Flow. Or “Stop Cock” to shut in a well for a pressure build up and then flow to simulate optimal flow conditions on a depleted well.

Gas Lift.
Wells that flow on a continuous flow basis yet can be over injected with gas and waste gas or are subject to flowing into a damaged flow line and creating a hazard.

Intermittent Gas Lift.
The produced liquids are not sufficient to maintain a continual flow situation. The use of the controller with this method is similar to stop cocking.

Intermittent Gas Lift With Plunger Lift.
This is the fastest growing method of operating a well today.

Gas Injection With Plunger Lift.
This design can be used with very high yields on shallow wells and has a very reasonable installation cost.

Plunger lift using the Multi controllers and TeleMax can take most marginal wells to a very high yield that cannot be obtained any other way.