TiMax Time Controller

The TiMax Time Controller is designed for operation with one motor valve plunger lift system producing all gas and liquids to the separator and into the sales line.

The selling of all gas is sufficient to create a short payoff period for this controller. TiMax provides for success of a well by allowing for a variable flow time exclusive of the valve open time. This means that, after plunger arrival, the well can flow for the time specified by the operator.

The TiMax shows the current status of the controller on the display with each display detailing the current phase of the production cycle that the controller is in. (Note: there are no keys to press to determine the current position of the cycle)

Shipping weight 19 lbs

TiMax A-B

The TiMax A-B Controller Includes a second solenoid to attach a second motor valve to. This allows the plunger to arrive on a lower pressure flow line that has been attached to the valve and a low-pressure system, such as a tank. The A-B switches from the low-pressure valve to the sales line valve upon arrival.

This means that you have two ways to get the plunger to the surface to sell the gas. This concept is an excellent prescription for wells that make erratic liquid loads during cycles.

Hours, minutes and seconds are all available to program. Use of an extended shut in time, for failure of the plunger to arrive, is a feature that permits the well to build an excess amount of pressure for the next attempt. This is a major advance over the normal ON-OFF timer.

Shipping weight: 20 lbs.