Twin L Plungers
The Twin-L Series plunger is designed
to stop paraffin or wax build up on the walls of the
tubing during flow.
The Twin-L plunger is made from 4140 machined tool steel
with the top shoulder and plunger base machined with
diagonal slots. These slots allow gas flow to create
a ‘spinning rotor effect’ so that that the
plunger can ‘scrape’ its way into the wax
buildup and create a cutting effect.
The grooves along the plunger are extra wide so that
more paraffin can be removed. The Twin-L series has
a 1.895" OD (outside diameter) to create an optimal
seal in the tubing; however, the OD can be altered to
fit your needs.
Length: 16 inches
| Plunger Diameters |
Weight |
| 1.50" for 2.00" OD |
6 lbs (2.7 kg) |
| 1.75" for 2.625" OD |
7 lbs (3.2 kg) |
| 2.00" for 2.375" OD |
8 lbs (3.7 kg) |
| 2.50" for 2.875" OD |
12 lbs (5.5 kg) |
| 3.00" for 3.50" OD |
14 lbs (6.3 kg) |
Shorter and lighter versions of this plunger are available
to meet your specific plunger lift system requirements.
|
